Telit Wireless Solutions LE910C series - Page 1843

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1843 of 1904 2022-03-04
Not Subject to NDA
0x1÷0xFFFF
:
The supported parameter value
range.
<Hex Data>
hex
N/A
It specifies ASCII coded byte
stream as hexadecimal values.
For example: 6162 for a 2-byte
value.
Value:
0÷20
:
The supported parameter value range.
If any one of the defined characteristics in peripheral is secured,
then write command initiate security procedure even though the
characteristic is not secured. (Limitation)
AT#BWRITE=?
Test command returns the supported range of values for parameters
AT#BWRITE=1,2B,"6162"
OK