Telit Wireless Solutions LE910C series - AT+WS46 - PCCA STD-101 Select Wireless Network

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 466 of 1904 2022-03-04
Not Subject to NDA
3.4.34. AT+WS46 - PCCA STD-101 Select Wireless Network
This command selects the cellular network (Wireless Data Service, WDS).
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT+WS46=[<n>]
Set command selects the cellular network (Wireless Data Service, WDS) to
operate with the TA (WDS-Side Stack Selection).
Parameter:
Name
Type
Default
Description
<n>
integer
N/A
WDS-Side Stack to be used by the TA.
4G/3G products support <n> parameter
values 22, 28 and 31. 31 is factory default
4G/3G/2G products support <n> parameter
values 12,22,25,28,29,30 and 31. 25 is factory
default
4G/3G/2G/TDSCDMA products support <n>
parameter values
12,22,25,28,29,30,31,32,33,34,35,36,37,38 and
39. 36 is factory default
Values:
12
:
GSM Digital Cellular Systems, GERAN only