Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 467 of 1904 2022-03-04
Not Subject to NDA
22
:
UTRAN only
25
:
3GPP Systems (GERAN and UTRAN and E-UTRAN)
28
:
E-UTRAN only
29
:
GERAN and UTRAN
30
:
GERAN and E-UTRAN
31
:
UTRAN and E-UTRAN
32
:
TDSCDMA only
33
:
GERAN and TDSCDMA
34
:
TDSCDMA and E-UTRAN
35
:
GERAN and TDSCDMA and E-UTRAN
36
:
GERAN and TDSCDMA and UTRAN and E-UTRAN
37
:
GERAN and TDSCDMA and UTRAN
38
:
TDSCDMA and UTRAN
39
:
TDSCDMA and UTRAN and E-UTRAN
The values in <n> for Query are mutually exclusive. If one value
(e.g. "25") is returned, other values shall not be returned.
<n> parameter setting is stored in NVM and available at next
reboot.
The factory default value depends on each variant.
LE910Cx-NA/EU/LA/E1: 3GPP Systems (GERAN and UTRAN and E-
UTRAN)
LE910Cx-AP/NF/N1/A1/L1 : UTRAN and E-UTRAN
LE910Cx-NS/SV/SA/ST: E-UTRAN only

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English