Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 258 of 1904 2022-03-04
Not Subject to NDA
3.2.2.84. AT#CDORM - Dormant control command
Dormant control command
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#CDORM=<action>[,<call_id>]
Set command used to:
1. Enable/Disable the indication of dormant mode.
2. Fast dormancy
3. Exit from dormancy.
Parameters:
Name
Type
Default
Description
<action>
integer
0
mode for control
Values:
0
:
Disable the dormant status unsolicited result code
1
:
Enable the dormant status unsolicited result code :
Refer to Additional info
2
:
Go to dormant(fast dormancy)
3
:
Exit dormant for <call_id> or first found call id if no
<call_id> mentioned.
<call_id>
integer
N/A
call identification number.
Value:
0÷17
:
only for Exit dormancy action
Additional info:

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English