Telit Wireless Solutions LE910C series - AT+CBC - Battery Charge

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1104 of 1904 2022-03-04
Not Subject to NDA
3.15.8. AT+CBC - Battery Charge
This command allows to read the current Battery Charge status.
•
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Other
No
-
2
AT+CBC
Execution command returns the current Battery Charge status.
Additional info:
Battery Charge status is shown in the format:
+CBC: <bcs>,<bcl>
Name
Type
Default
Description
<bcs>
integer
N/A
battery status
Values:
0
:
ME is powered by the battery
1
:
ME has a battery connected, and charger pin is
being powered
2
:
ME does not have a battery connected
3
:
Recognized power fault, calls inhibited
<bcl>
integer
N/A
battery charge level, only if
<bcs>=0
Values: