Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1003 of 1904 2022-03-04
Not Subject to NDA
3.12.3. Audio Profiles
3.12.3.1. AT#PRST - Audio Profile Factory Configuration
This command restores the audio profile to default.
It has no effect and is included only for backward compatibility.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#PRST
Execution command resets the actual audio parameters in the NVM of
the device to the default set. It is not allowed if active audio profile is 0.
The audio parameters to reset are:
- microphone line gain
- earpiece line gain
- side tone gain
- LMS adaptation speed (step size)
- LMS filter length (number of coefficients)
- speaker to micro signal power relation
- noise reduction max attenuation
- noise reduction weighting factor (band 300-500Hz)
- noise reduction weighting factor (band 500-4000Hz)
- AGC Additional attenuation
- AGC minimal attenuation
- AGC maximal attenuation
AT#PRST=?
Test command returns the OK result code.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English