Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 607 of 1904 2022-03-04
Not Subject to NDA
3.6.7. AT+CSCB - Select Cell Broadcast
The command selects which types of Cell Broadcast Messages are to be received by the
device.
3GPP TS 27.005
3GPP TS 23.041
3GPP TS 23.038
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Other
No
-
2
AT+CSCB=[<mode>[,<mids>[,<dcss>]]]
Set command selects which types of Cell Broadcast Messages are to be
received by the device
Parameters:
Name
Type
Default
Description
<mode>
integer
0
select which types of Cell Broadcast
messages are to be received
Values:
0
:
the message types defined by <mids> and <dcss> are
accepted
1
:
the message types defined by <mids> and <dcss> are
rejected
<mids>
string
-
message Identifiers: all different possible
combinations of the CBM message
identifiers; default is empty string ("").
<dcss>
string
-
Data Coding Schemes: all different possible
combinations of CBM data coding schemes;
default is empty string ("").

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English