Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1529 of 1904 2022-03-04
Not Subject to NDA
3.23.4. AT#TCPATRUNCFG - Set TCP AT Run Service Parameters
This command configures the TCP AT RUN service Parameters.
Telit Running AT Commands Remotely Application Note, 80000NT10029a
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#TCPATRUNCFG=<connId>,<instance>,<tcpPort>,<tcpHostPort>,<tcpHost>[,<u
rcmod> [,<timeout>[,<authMode>[,<retryCnt>[,<retryDelay>]]]]]
Set command configures the TCP AT RUN service.
Parameters:
Name
Type
Default
Description
<connId>
integer
1
socket connection identifier
Value:
1÷conMax
:
Socket connection identifier. conMax
value is returned by test command.
<instance>
integer
2
AT instance that will be used by the
service to run the AT Command
Value:
1÷3
:
AT instance
<tcpPort>
integer
1024
TCP Listen port for the connection
to the service in server mode
Value:
1÷65535
:
TCP Listen port

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English