LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1528 of 1904 2022-03-04
string parameter enclosed between
double quotes containing the phone
number or the password:
- phone number shall contain
numerical characters and/or the
character "+" at the beginning of the
string and/or the character "*" at the
end of the string.
- password shall be 16 characters
length.
When the character "*" is used, it means that all the numbers that
begin with the defined digit are part of the white list, e.g.:
- "+39*" all Italian users can ask to run AT Command via SMS
- "+39349*" all users having the Service Provider identified by 349
can ask to run AT Command via SMS
AT#SMSATWL?
Read command returns the list elements in the format:
#SMSATWL: [<entryType>,<string>]
AT#SMSATWL=?
Test command returns the supported values for parameters <action>,
<index> and <entryType>.
The command will return ERROR if executed using SMSATRUN digest mode
or TCPATRUN server mode.
To Next Page
Loading...
