Telit Wireless Solutions LE910C series - Customization Feature at Commands; AT#AVAHIEN - Enable;Disable AVAHI Service

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1821 of 1904 2022-03-04
Not Subject to NDA
Customization Feature AT Commands
3.33.1. AT#AVAHIEN - Enable/disable AVAHI service
This command is to enable/disable AVAHI service.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#AVAHIEN=<Enable/Disable >
Set command enables/disables the AVAHI service.
Parameter:
Name
Type
Default
Description
AT#AVAHIEN?
Read command reports the currently selected parameters in the format:
#AVAHIEN=<enable>
AT#AVAHIEN=?
Test command reports the supported range of values for parameters
#AVAHIEN: (0-1)