Telit Wireless Solutions LE910C series - AT+ODIS - Commands for Saving and Retrieving the Odis Parameters

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1593 of 1904 2022-03-04
Not Subject to NDA
3.25.11. AT+ODIS - Commands for Saving and Retrieving the Odis Parameters
This command allows the end-user to handle the Host ODIS parameters. In case of
AT&T LwM2M agent up and running, the command is executed internally to the LwM2M
client, updating this client about the values change (i.e.: the server will be notified about
this change if the observation on these items is active).
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+ODIS=<instance>,<hostUniqueDevId>,<hostManufacturer>,<hostModel>,<host
SwVersion>
Parameters:
Name
Type
Default
Description
<instance>
integer
N/A
Instance number
Values:
0
:
Instance #0
1
:
Instance #1
<hostUniqueDevId>
string
-
contains a string, between
double quotes, with the host
unique device identifier
HUID0, default value
<hostManufacturer>
string
-
contains a string, between
double quotes, with the host
manufacturer identifier.
HMAN0, default value
<hostModel>
string
-
contains a string, between
double quotes, with the host
model identifier.
HMOD0, default value