Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1881 of 1904 2022-03-04
Not Subject to NDA
3.35.25. AT#BSSPCONF - BLE Secure Simple Pairing Confirmation
This command is used for BLE Secure Simple Pairing Confirmation.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#BSSPCONF=<Bluetooth Address>,<Bluetooth Address Type>,<Passkey
Confirmation>
Set command is used to confirm the Security Pairing of a device. The user
must confirm the passkey - if no confirmation is sent by the user within
the bonding time (which is approximately 30 seconds) then the pairing is
rejected.
Asynchronous Event: #SSPCONF:<Bluetooth address>,<address
type>,<passkey>,<?>
Parameters:
Name
Type
Default
Description
<Bluetooth
Address>
string
N/A
It specifies the remote Bluetooth
address
Value:
1÷48
:
The supported parameter value range.
<Bluetooth
Address Type>
string
N/A
It specifies the remote Bluetooth
address type
Where,
t2- public address
t3- random address
Value:
0÷2
:
The supported parameter value range.
<Passkey
Confirmation>
integer
N/A
It specifies the confirmation
request of the passkey. The

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English