Telit Wireless Solutions LE910C series - AT+CSSN - SS Notification

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 400 of 1904 2022-03-04
Not Subject to NDA
3.4.13. AT+CSSN - SS Notification
The command refers to supplementary service related network initiated notifications.
•
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT+CSSN=[<n>[,<m>]]
Set command enables/disables the presentation of notification result
codes from TA to TE.
Parameters:
Name
Type
Default
Description
<n>
integer
0
Set +CSSI result code presentation status
When <n>=1 and a supplementary service
notification is received after a mobile
originated call setup, an unsolicited code is
sent to TE before any other MO call setup
result codes
+CSSI: <code1>
Values:
0
:
disable
1
:
enable
<m>
integer
0
Sets the +CSSU result code presentation
status
When <m>=1 and a supplementary service
notification is received during a mobile
terminated call setup or during a call, an