LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 399 of 1904 2022-03-04
international numbering scheme (contains the
character "+")
alphanumeric representation of
<number> corresponding to the entry
found in phonebook; used character set
should be the one selected with +CSCS
If no call is active then only OK message is sent. This command is useful
in conjunction with command +CHLD to know the various call status for
call holding
For VOLTE,
15. conference call participant’s numbers start with “sip:” or “tel:”,
for example: sip:+12125551212
AT+CLCC=?
Test command returns OK result code
To Next Page
Loading...
