Telit Wireless Solutions LE910C series - Event

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 491 of 1904 2022-03-04
Not Subject to NDA
3.4.41. AT#LTEULOOS - Enable or Disable for reporting
EVENT_LTE_UL_OUT_OF_SYNC event
This command is enabled or disabled for reporting EVENT_LTE_UL_OUT_OF_SYNC
event.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#LTEULOOS=<mode>
Set command enables/disables EVENT_LTE_UL_OUT_OF_SYNC event
reports depending on the parameter <mode>.
The module will displays URC when it happens
“EVENT_LTE_UL_OUT_OF_SYNC” event if the <mode> is 1.
#LTEULOOS: REPORT LTE_UL_OUT_OF_SYNC
Parameter:
Name
Type
Default
Description
<mode>
integer
0
Reporting EVENT_LTE_UL_OUT_OF_SYNC
event.
Values:
0
:
Disable to report “EVENT_LTE_UL_OUT_OF_SYNC”
1
:
Enable to report “EVENT_LTE_UL_OUT_OF_SYNC”
The setting is saved in NVM
AT#LTEULOOS?
Read command reports the currently selected <mode> in the format: