Telit Wireless Solutions LE910C series - AT+CPWD - Change Facility Password

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 378 of 1904 2022-03-04
Not Subject to NDA
3.4.5. AT+CPWD - Change Facility Password
This command is used to change the password for the facility lock function defined by
command Facility Lock +CLCK.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Other
Yes
-
2
AT+CPWD=<fac>,<oldpwd>,<newpwd>
Action command sets a new password for the facility lock function defined
by command Facility Lock +CLCK.
Parameters:
Name
Type
Default
Description
<fac>
string
N/A
facility
Values:
"AB"
:
All Barring services
"AC"
:
All inComing barring services
"AG"
:
All outGoing barring services
"AI"
:
BAIC (Barr All Incoming Calls)
"AO"
:
BAOC (Barr All Outgoing Calls)
"IR"
:
BIC-Roam (Barr Incoming Calls when Roaming
outside the home country)
"OI"
:
BOIC (Barr Outgoing International Calls)
"OX"
:
BOIC-exHC (Barr Outgoing International Calls
except to Home Country)