Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 303 of 1904 2022-03-04
Not Subject to NDA
3.2.4.12. AT+FLO - Select Flow Control Specified By Type
Set command selects the flow control behaviour of the serial port in both directions:
from DTE to DTA and from DTA to DTE.
ITU T.31 and TIA/EIA-578-A specifications
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+FLO=<type>
Set command selects the flow control behaviour of the serial port in both
directions: from DTE to DTA and from DTA to DTE.
Parameter:
Name
Type
Default
Description
<type>
integer
2
flow control option for the data on the serial
port
Values:
0
:
flow control None
2
:
flow control Hardware (CTS-RTS)
This command is a shortcut of the +IFC command.
+FLO's settings are functionally a subset of &K's ones.
AT+FLO?
Read command returns the current value of parameter <type>.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English