Telit Wireless Solutions LE910C series - AT#LTESFN - Read LTE System and Subframe Number

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 539 of 1904 2022-03-04
Not Subject to NDA
3.4.60. AT#LTESFN - Read LTE system and subframe number
This command can report the current LTE system frame number sub frame number.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#LTESFN[=[<sysFrameNumber>[,<subFrameNumber>]]]
Read command reports the current LTE system frame number
<sysFrameNumber> and sub frame number <subFrameNumber> in the
format:
#LTESFN: <sysFrameNumber>,<subFrameNumber>
Parameters:
Name
Type
Default
Description
<sysFrameNumber>
integer
N/A
system frame number
Value:
0÷1023
:
system frame number value
<subFrameNumber>
integer
N/A
subframe number
Value:
0÷9
:
subframe number value
The <sysFrameNumber> and <subFrameNumber> can be reported
when module has LTE system. In other words, if LTE is not
acquired, the ERROR is returned. The <sysFrameNumber> and
<subFrameNumber> values are returned until the LTE RAT is
completely changed to no-service or another RAT.
AT#LTESFN?