Telit Wireless Solutions LE910C series - AT+CMGW - Write Short Message to Memory

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 656 of 1904 2022-03-04
Not Subject to NDA
3.6.19. AT+CMGW - Write Short Message to Memory
The command is related to writing short messages.
3GPP TS 27.005
3GPP TS 23.040
3GPP TS 23.038
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+CMGW
Execution command writes a new short message in the <memw>
memory storage (see +CPMS). It can have two syntax formats according
to the SMS format: PDU or Text mode (see +CMGF command). If short
message is successfully written the following URC is displayed:
+CMGW: <index>
Additional info:
In PDU mode the +CMGW command has the following syntax:
AT+CMGW=<length>[,<stat>]
After command line is terminated with <CR>, the module responds
sending a four-character sequence prompt:
<CR><LF><greater_than><space> (IRA 13, 10, 62, 32)
and waits for the specified number of bytes.