Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 657 of 1904 2022-03-04
Not Subject to NDA
To write the message issue Ctrl-Z char (0x1A hex). To exit without
sending the message issue ESC char (0x1B hex).
Name
Type
Default
Description
<length>
integer
N/A
length in bytes of the
PDU to be written
Value:
7÷164
:
number of bytes
<stat>
integer
N/A
message status
Values:
0
:
new message new message (received unread
message; default for DELIVER messages
(3GPP TS 23.040 SMS-DELIVER messages))
1
:
read message
2
:
stored message not sent yet (default for
SUBMIT messages (3GPP TS 23.040 SMS-
SUBMIT messages))
3
:
stored message already sent
<data>
hex
-
PDU bytes, given in
online mode
In Text mode the +CMGW command has the following syntax:
AT+CMGW[=<da>[,<toda>[,<stat>]]]
After command line is terminated with <CR>, the module responds
sending a four-character sequence prompt:

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English