To Next Page

To Previous Page

LE910Cx AT Commands Reference Guide

80502ST10950A Rev. 14 Page 658 of 1904 2022-03-04

Not Subject to NDA

<CR><LF><greater_than><space> (IRA 13, 10, 62, 32)

After this prompt, you can enter text that should be formatted as

follows:

- if current <dcs> (see +CSMP) indicates that GSM03.38/23.038

default alphabet is used and current <fo> (see +CSMP) indicates

that 3GPP TS 03.40/23.040 TP-User-Data-Header-Indication is

not set, then ME/TA converts the entered text into GSM

alphabet, according to 3GPP TS 27.005, Annex A; backspace can

be used to delete last character and carriage returns can be

used..

- if current <dcs> (see +CSMP) indicates that 8-bit or UCS2 data

coding scheme is used or current <fo> (see +CSMP) indicates

that 3GPP TS 23.040 TP-User-Data-Header-Indication is set,

the entered text should consist of two IRA character long

hexadecimal numbers which ME/TA converts into 8-bit octet

(e.g. the 'asterisk' will be entered as 2A (IRA50 and IRA65) and

this will be converted to an octet with integer value 0x2A)

The command waits for the specified number of bytes.

To write the message issue Ctrl-Z char (0x1A hex). To exit without

writing the message issue ESC char (0x1B hex).

Name

Type

Default

Description

<da>

string

destination address, string type

represented in the currently

selected character set (see

+CSCS).

<toda>

integer

N/A

type of destination address

For Verizon FW, the range of

<toda> is 0 - 255.

Telit Wireless Solutions LE910C series At Commands Reference Guide

Other manuals for Telit Wireless Solutions LE910C series