Telit Wireless Solutions LE910C series - Page 659

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 659 of 1904 2022-03-04
Not Subject to NDA
Values:
129
:
number in national format
145
:
number in international format (contains the
character "+")
<stat>
string
"STO
UNSENT"
message status
Values:
"REC
UNREAD"
:
new received message unread
"REC READ"
:
received message read
"STO UNSENT"
:
message stored not yet sent
"STO SENT"
:
message stored already sent
Unsolicited field:
Name
Type
Description
<index>
integer
message location index in the memory <memw>
(see +CPMS). If message storing fails for some
reason, an error code is reported.
The DCD signal shall be in ON state while <data> is entered. The
echoing of <data> is controlled by echo command E.
In PDU mode, not only SUBMIT messages can be stored in SIM,
but also DELIVER and STATUS REPORT messages (3GPP TS
23.040 SMS-STATUS-REPORT messages). SUBMIT messages can
only be stored with status 2 or 3; DELIVER and STATUS REPORT
messages can only be stored with status 0 or 1.