Telit Wireless Solutions LE910C series - AT#LABIMS - IMS (34.299) Configuration for GCF;PTCRB Certification

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 775 of 1904 2022-03-04
Not Subject to NDA
3.9.4. AT#LABIMS - IMS (34.299) Configuration for GCF/PTCRB certification
IMS (34.299) Configuration for GCF/PTCRB certification
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#LABIMS
resets the IMS parameters in the NVM of the device to the IR92 for
GCF/PTCRB certification.
Manual reboot is required after changing.
This command is required for testing GCF/PTCRB IMS 34.229.
AT#LABIMS=?
Test command returns the OK result code.