Telit Wireless Solutions LE910C series - AT+CGPADDR - Show PDP Address

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 801 of 1904 2022-03-04
Not Subject to NDA
3.9.12. AT+CGPADDR - Show PDP Address
This command returns a list of PDP addresses for the specified context identifiers.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CGPADDR=[<cid>[,...]]
Execution command returns a list of PDP addresses for the specified
context identifiers.
Parameter:
Name
Type
Default
Description
<cid>
integer
-
specifies a PDP context definition, see
+CGDCONT command. If no <cid> specified,
the addresses for all defined contexts are
returned.
Additional info:
The command returns a row of information for every <cid> whose
context has been defined. No row is returned for a <cid> whose
context has not been defined. Here is the response format:
+CGPADDR: <cid>,<PDP_addr><CR><LF>
+CGPADDR: <cid>,<PDP_addr><CR><LF>
...
Name
Type
Default
Description
<PDP_addr>
string
-
identifies the terminal in an
address space applicable to the