Telit Wireless Solutions LE910C series - AT#OAP - Open Audio Loop

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 976 of 1904 2022-03-04
Not Subject to NDA
3.12.1.11. AT#OAP - Open Audio Loop
This set command enables/disables the Open Audio Path.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#OAP=[<mode>]
Parameter:
Name
Type
Default
Description
<mode>
integer
0
enables/disables the Open Audio Path
Values:
0
:
disable
1
:
enable
The audio loop will be established between microphone and
speaker using sidetone scaling value.
AT#OAP command is intended for testing purposes only.
Thus, care must be taken to ensure that during the command
execution no other audio interacting commands are issued.
AT#OAP?
Read command reports the current value of the parameter <mode> in the
format:
#OAP: <mode>