Telit Wireless Solutions LE910C series - AT+CRLP - Radio Link Protocol

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 107 of 1904 2022-03-04
Not Subject to NDA
3.1.20. AT+CRLP - Radio Link Protocol
Set Radio Link Protocol (RLP) parameters.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+CRLP=[<iws>[,<mws>[,<T1>[,<N2>[,<ver>]]]]]
Set command sets parameters used when non-transparent data calls are
originated.
Parameters:
Name
Type
Default
Description
<iws>
integer
N/A
IWF window dimension
Values:
1÷61
:
factory default value is 61 (ver 0/1)
1÷488
:
factory default value is 240 (ver 2)
<mws>
integer
N/A
MS window dimension
Values:
1÷61
:
default value is 61 ( ver 0/1 )
1÷488
:
factory default value is 240 (ver 2)
<T1>
integer
N/A
acknowledge timer (10 ms units)
Values:
39÷255
:
default value is 48 (ver 0 or 1)