Telit Wireless Solutions LE910C series - Page 108

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 108 of 1904 2022-03-04
Not Subject to NDA
42÷255
:
default value is 52 (ver 2)
<N2>
integer
N/A
retransmission attempts
Value:
1÷255
:
default value is 6 (ver 0/1/2)
<ver>
integer
N/A
protocol version
Value:
0÷2
:
supported value
AT+CRLP?
Read command returns current settings for each supported RLP version
<ver>.
+CRLP: <iws>,<mws>,<T1>,<N2>
+CRLP: <iws>,<mws>,<T1>,<N2>,<ver>
OK
AT+CRLP=?
Test command returns the range of setting value for each supported RLP
version <ver>.
Versions 0 and 1 share the same parameter set. Read and Test commands
shall return only one line for this set (where <ver> is not present )