Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1785 of 1904 2022-03-04
Not Subject to NDA
3.32.6. AT#MQCFG2 - Configure Additional MQTT Parameters
This command sets the optional connection parameters for the selected MQTT client.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#MQCFG2=<instance_number>,<keepalive>,<clean_session>
Set command sets optional connection parameters for the selected MQTT
client
Parameters:
Name
Type
Default
Description
<instance_number>
integer
N/A
Selects the client instance. The
list of available clients is
obtained with AT#MQEN? or the
read command.
Value:
1÷maxClients
:
client instance range. to know
maxClients value use test
command.
<keepalive>
integer
N/A
Timeout of periodic packet to
keep connection open
Value:
1÷3600
:
timeout expressed in sec
<clean_session>
integer
N/A
Indicates whether a persistent
connection is required. Without
a persistent connection, when
the client is offline all
information and messages that
are queued from a previous
persistent session are lost.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English