Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 814 of 1904 2022-03-04
Not Subject to NDA
3.9.19. AT+CGEQMIN - 3G Quality of Service Profile (Minimum Acceptable)
This command sets the 3G Quality of Service parameters for the context identified by the
context identification parameter.
3GPP TS 27.007; 3GPP TS 03.60/23.060; 3GPP TS 24.008
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+CGEQMIN=[<cid>[,<Traffic class>[,<Maximum bitrate UL>[,<Maximum
bitrate DL>[,<Guaranteed bitrate UL>[,<Guaranteed bitrate DL>[,<Delivery
order>[,<Maximum SDU size>[,<SDU error ratio>[,<Residual bit error
ratio>[,<Delivery of erroneous SDUs>[,<Transfer delay>[,<Traffic handling
priority>[,<Source Statistics Descriptor>[,<Signalling
Indication>]]]]]]]]]]]]]]]
Set command allows specifying a 3G quality of service profile for the
context identified by the (local) context identification parameter <cid>
which is checked by the MT against the negotiated profile returned in the
Activate/Modify PDP Context Accept Message.
Parameters:
Name
Type
Default
Description
<cid>
integer
-
PDP context identification (see
+CGDCONT command).
<Traffic class>
integer
4
traffic class.
Values:
0
:
conversational
1
:
streaming
2
:
interactive

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English