Telit Wireless Solutions LE910C series - AT+CAMM - Accumulated Call Meter Maximum

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 159 of 1904 2022-03-04
Not Subject to NDA
3.2.2.33. AT+CAMM - Accumulated Call Meter Maximum
This command sets the Advice of Charge related to accumulated call meter maximum
(ACMmax) value stored in SIM.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Other
No
-
2
AT+CAMM=<acmmax>[,<pwd>]
Set command sets the Advice of Charge related accumulated call meter
maximum value (ACMmax) stored in SIM. ACMmax contains the maximum
number of home units allowed to be consumed by the subscriber. When
ACM (refer +CACM) reaches ACMmax calls are prohibited. SIM PIN2 is
usually required to set the value.
Parameters:
Name
Type
Default
Description
<acmmax>
string
-
accumulated call meter maximum value
<pwd>
string
-
SIM PIN2
Setting <acmmax> to 0 disables the feature.
AT+CAMM?
Read command returns the current value of ACMmax in the format:
+CAMM: <acmmax>