Telit Wireless Solutions LE910C series - AT#CSURVNLF - Network Survey CR LF Removing

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1477 of 1904 2022-03-04
Not Subject to NDA
3.22.3. AT#CSURVNLF - Network Survey CR LF Removing
This command enables/disables the automatic <CR><LF> removing from each network
survey information text line.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#CSURVNLF=[<value>]
Parameter:
Name
Type
Default
Description
<value>
integer
0
enables/disables the automatic <CR><LF>
removing from each network survey
information text line
Values:
0
:
disables <CR><LF> removing; they will be present in
the information text line
1
:
enables <CR><LF> removing from information text line
AT#CSURVNLF?
Read command reports whether the automatic <CR><LF> removing from
each network survey information text line is currently enabled or not, in
the format:
<value>
AT#CSURVNLF=?
Test command reports the range of values for parameter <value>.