Telit Wireless Solutions LE910C series - AT$LICLS - Enable;Disable Unsolicited Response

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1661 of 1904 2022-03-04
Not Subject to NDA
3.28.1.3. AT$LICLS - Enable/Disable Unsolicited Response
This command enables the $LICLS: unsolicited response.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$LICLS=<mode>
Set command enables/disables the unsolicited $LICLS: response. The
unsolicited result code is in the format:
$LICLS: <requestType>[,<cid>]
Parameter:
Name
Type
Default
Description
<mode>
integer
1
unsolicited response mode
Values:
0
:
disable unsolicited
1
:
enable unsolicited
Unsolicited fields:
Name
Type
Description
<requestType>
integer
If the <requestType> is a setup request, the
unsolicited indication is sent/used to request
the client to define, setup, activate and
prepare the PDP context.
If <requestType> is a release request, the
unsolicited indication is sent/used to inform
the client that the PDP context (associated
with this command type) including the