Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1280 of 1904 2022-03-04
Not Subject to NDA
3.17.25. AT#NTP - Calculate and Update Date and Time with NTP
Calculate and Update Data and Time with NTP
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#NTP=<name>[,<port>[,<update>[,<timeout>[,<tz>]]]]
This set command permits to calculate and update date and time through
NTP protocol sending a request to a NTP server and then returns an
intermediate response having the following format:
#NTP: "yy/MM/dd,hh:mm:ss+zz"
Parameters:
Name
Type
Default
Description
<name>
string
-
address of the NTP server
This parameter can be either: any valid IP
address in the format: "xxx.xxx.xxx.xxx"
or "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx"
any host name to be solved with a DNS
query
<port>
integer
123
NTP server port to contact
Only default value can be selected since
nonofficial ports are not supported.
Interface to provide compatibility with
ME910.
Value:
1÷65535
:
Port of the time server
<update>
integer
0
enable/disable system time update.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English