Telit Wireless Solutions LE910C series - Page 1652

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1652 of 1904 2022-03-04
Not Subject to NDA
AT#M2MREAD=?
Test command returns OK result code.
AT#M2MREAD="/xxfolder/config/config.txt"
<<< here receive the prompt; then the file is displayed, immediately after
the prompt
OK
AT#M2MCHDIR="/xxfolder/azc"
OK
AT#M2MREAD=config/config.txt
<<< here receive the prompt; then the file is displayed, immediately after
the prompt
OK