Telit Wireless Solutions LE910C series - Page 171

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 171 of 1904 2022-03-04
Not Subject to NDA
Values:
1
:
either Line 1 (CPHS context) or Voice
(3GPP context)
2
:
Line 2 (CPHS context only)
3
:
Fax
4
:
E-mail
5
:
Other
<count>
integer
network information reporting the number of
pending messages related to the message waiting
indicator <indicator>.
<count>
integer
number of pending messages related to the
message waiting indicator <indicator> as it is
stored on SIM
Entering AT#MWI= returns OK but has no effect.
AT#MWI?
Read command reports whether the presentation of the message waiting
indicator URC is currently enabled or not, and the status of the message
waiting indicators as they are currently stored on SIM. The format is:
#MWI: <enable>,<status>[,<indicator>[,<count>][<CR><LF>
#MWI: <enable>,<status>,<indicator>[,<count>][...]]]
AT#MWI=?
Test command returns the range of available values for parameter
<enable>.