Telit Wireless Solutions LE910C series - Page 170

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 170 of 1904 2022-03-04
Not Subject to NDA
- The module is powered on, the URC reports the status of the
message waiting indicators, as they are currently stored on SIM, the
format is:
#MWI: <status>[,<indicator>[,<count>][<CR><LF>
#MWI: <status>,<indicator>[,<count>][...]]]
The parameters are described in the unsolicited fields section for
each URC format.
Unsolicited fields:
Name
Type
Description
<status>
integer
indicates clear or set action when it is received
from the network.
Values:
0
:
clear; has been deleted one of the
messages related to the indicator
<indicator>.
1
:
set; there is a new waiting message
related to the indicator <indicator>
<status>
integer
indicates the status when it is read from SIM.
Values:
0
:
no waiting message indicator is currently
set. In this case no other information is
reported.
1
:
there are waiting messages related to the
message waiting indicator <indicator>
<indicator>
integer
message indicator has the same meaning
regardless if it comes from network or it is read
from SIM.