Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1386 of 1904 2022-03-04
Not Subject to NDA
private IPV4 address the client doesn’t consider
this and connects with server using the IP
address used in AT#FTPOPEN
<FTPSEn>
integer
0
enable or
disable
FTPS
security
Values:
0
:
disable FTPS security: all FTP commands will
perform plain FTP connections
1
:
enable FTPS security
<FTPext>
integer
0
FTP
extension
Values:
0
:
always use EPRT and EPSV commands
1
:
if both module and server ipv4 use PORT and
PASV commands Option added to pass-through
firewall that is unaware of the extended FTP
commands for FTPPUT, FTPLIST, FTPAPP,
FTPGET
if parameter <tout> is omitted the behavior of Set command is the
same as Read command.
AT#FTPCFG?
Read command reports the currently selected parameters in the format:
AT#FTPCFG=<tout>,<IPPignoring>,<FTPSEn>,<FTPext>

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English