Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 667 of 1904 2022-03-04
Not Subject to NDA
Name
Type
Default
Description
<param1>
integer
N/A
length in bytes of the PDU to be
sent (excluding the SMSC address
octets)
Value:
7÷164
:
number of bytes
<param2>
hex
-
PDU bytes
In case of Text mode the parameters meaning is the following:
Name
Type
Default
Description
<param1>
string
-
destination address
<param2>
string
-
text to send
Unsolicited field:
Name
Type
Description
<mr>
integer
TP-Message-Reference number as per 3GPP TS 23.040
in PDU mode: when the length of the SMSC address equals 0, then
the SMSC address set with command +CSCA is used; in this case
the SMSC Type Of Address octet shall not be present in the
<param2>.
In Text mode, the text entered with <param2> should be enclosed
between double quotes and formatted as follows:
- if current <dcs> (see +CSMP) indicates that 3GPP TS 23.038
default alphabet is used and current <fo> (see +CSMP) indicates
that 3GPP TS 23.040 TP-User-DataHeader-Indication is not set,

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English