To Next Page

To Previous Page

LE910Cx AT Commands Reference Guide

80502ST10950A Rev. 14 Page 668 of 1904 2022-03-04

Not Subject to NDA

then the ME/TA converts the entered text into GSM alphabet,

according to 3GPP TS 27.005 Annex A.

- if current <dcs> (see +CSMP) indicates that 8-bit or UCS2 data

coding scheme is used and current <fo> (see +CSMP) indicates

that 3GPP TS 23.040 TP-User-DataHeader-Indication is set, then

the entered text should consist of two IRA character long

hexadecimal numbers which ME/TA converts into 8-bit octet

(e.g. the asterisk will be entered as 2A (IRA 50 and IRA 65) and

this will be converted to an octet with integer value 0x2A).

If message sending fails for some reason, then an error code is

reported.

AT#CMGS=?

Test command returns the OK result code.

To avoid malfunctions it is suggested to wait for the #CMGS: <mr> or +CMS

ERROR: <err> response before issuing further commands.

The command maximum length is 560 including the AT command itself. For

example: AT#CMGS="1234567","SMS text" the length is 28.

Telit Wireless Solutions LE910C series At Commands Reference Guide

Other manuals for Telit Wireless Solutions LE910C series