Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 890 of 1904 2022-03-04
Not Subject to NDA
<status>
integer
current SIM status
Values:
0
:
SIM not inserted
1
:
SIM inserted
2
:
SIM inserted and PIN unlocked
3
:
SIM inserted and READY (SMS and
Phonebook access are possible)
The command reports the SIM status change after the <mode> has
been set to 2.
It is strongly suggested to set <mode>=2 and save the value in the
user profile, then power off the module. The proper SIM status will
be available at the next power on.
AT#QSS?
Read command reports whether the unsolicited indication #QSS is
currently enabled or not, along with the SIM status, in the format:
#QSS: <mode>,<status>
The parameters are described in the previous sections.
AT#QSS=?
Test command returns the supported range of values for parameter
<mode>.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English