Telit Wireless Solutions LE910C series - Page 1008

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1008 of 1904 2022-03-04
Not Subject to NDA
<add_atten>
integer
-
AGC Additional attenuation
(unused)
<min_atten>
integer
-
AGC minimal attenuation
(unused)
<max_atten>
integer
-
AGC maximal attenuation
(unused)
It has no effect and is included only for backward compatibility.
AT#PSET?
Read command returns the parameters for the active profile in the format:
#PSET:
<scal_in>,<scal_out>,<side_tone_atten>,<adaption_speed>,<filter_length>,<rxtxrel
ation>,<nr_atten>,<nr_w_0>,<nr_w_1>,<add_atten>,<min_atten>,<max_atten>
It is not allowed if active audio profile is 0.
AT#PSET=?
Test command returns the supported range of values for the audio parameters.