Telit Wireless Solutions LE910C series - Page 604

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 604 of 1904 2022-03-04
Not Subject to NDA
•
Set the parameters for an outgoing message with 24 hours of validity
period and default properties:
AT+CSMP=17,167,0,0
OK
Set the parameters for an outgoing message with validity period in
enhanced format: the <vp> string actually codes 24 hours of validity
period.
AT+CSMP=9,"01A80000000000"
OK
Set the parameters for an outgoing message with validity period in
enhanced format: the <vp> string actually codes 60 seconds of
validity period.
AT+CSMP=9,"023C0000000000"
OK
Set the parameters for an outgoing message with validity period in
enhanced format: the <vp> string actually codes 29 hours 85 minutes
30 seconds of validity period.
AT+CSMP=9,"03925803000000"
OK