Telit Wireless Solutions LE910C series - Page 1781

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1781 of 1904 2022-03-04
Not Subject to NDA
<message>
string
-
Message to publish on the
topic. Maximum length of
message depends on protocol
specification and system
memory available.
The maximum command line buffer size for LE910Cx Linux is 560
bytes, which means only the input bytes (i.e. from "AT" to the last
given parameter) less or equal to 560 bytes will be accepted.
AT#MQPUBS=?
Test command reports the available range of values for parameters
#MQPUBS: (1-maxClients),,(0-1),(0-2),,
Set command
AT#MQPUBS=1,"TOPIC"
OK
AT#MQPUBS=1,"TOPIC",1
OK
AT#MQPUBS=1,"TOPIC",1,2
OK
AT#MQPUBS=1,"TOPIC",1,2,"MESSAGE"
OK
Test command
AT#MQPUBS=?
#MQPUBS: (1-2),,(0-1),(0-2),
OK