Telit Wireless Solutions LE910C series - Page 1783

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1783 of 1904 2022-03-04
Not Subject to NDA
<ssl_en>
integer
0
Enable/Disable SSL
Values:
0
:
disable
1
:
enable
The SSL encryption can be enabled only if <Enable> parameter of
#SSLEN is set to 0, <FTPSEn> parameter of #FTPCFG is set to 0
and <ssl_enabled> parameter of #HTTPCFG is set to 0.
AT#MQCFG?
Read command returns the status of the MQTT stack in the format
#MQCFG: <instance_number>,<host_name>,<port>,<cid>[,<ssl_en>]
AT#MQCFG=?
Test command reports the available range of values for parameters
#MQCFG: (1,maxClients),,(1-65535),(1-maxCid),(0-1)