Telit Wireless Solutions LE910C series - Page 494

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 494 of 1904 2022-03-04
Not Subject to NDA
#ALLOWHAC: <mode>
AT#ALLOWHAC=?
Test command returns all supported values of the parameter <mode>.
There is a possibility that this may cause GCF failures in the existing
GCT test cases.
There is a possibility that any new GCF test cases could fail.
There is a possibility that some carriers do not want UE to camp onto
the network when only High Access class is enabled in the SIM.
Therefore, this function should not be activated without the network
provider and customer approval.