Telit Wireless Solutions LE910C series - Page 1526

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1526 of 1904 2022-03-04
Not Subject to NDA
Unsolicited field:
Name
Type
Description
<text>
string
when unsolicited is enabled, the AT Command
requested via SMS is indicated to TE with unsolicited
result code:
#SMSATRUN: <text>
e.g.:
#SMSATRUN: AT+CGMR;+CGSN;+GSN;+CCLK
Unsolicited is dumped on the instance that requested
the service activation.
AT#SMSATRUNCFG?
Read command returns the current settings of parameters in the format:
#SMSATRUNCFG:<instance>,<urcmod>,<timeout>
AT#SMSATRUNCFG=?
Test command returns the supported values for the #SMSATRUNCFG
parameters.
The instance used for the SMS AT RUN service is the same used for the
EvMoni service. Therefore, when the #SMSATRUNCFG sets the <instance>
parameter, the change is reflected also in the <instance> parameter of the
#ENAEVMONICFG command, and vice versa.
The set command returns ERROR if the command AT#ENAEVMONI?
returns 1 as <mod> parameter or the command AT#SMSATRUN? returns 1
as <mod> parameter.