Telit Wireless Solutions LE910C series - Page 76

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 76 of 1904 2022-03-04
Not Subject to NDA
call to the number stored in position <index> in the selected
phonebook.
The type of call depends on the last setting of the command
+FCLASS.
See &Z and &N commands respectively to write or read the phone
number on/from the internal phonebook of the module.
AT#ACALEXT?
Read command returns the current value of <mode> and <index> in the
format:
#ACALEXT: <mode>,<index>
AT#ACALEXT=?
Test command returns three ranges of values: the first for parameter
<mode>, the second for parameter <index>, when the internal phonebook
is chosen, and the third for parameter <index>, when the "SM" phonebook
is chosen, the fourth for parameter <index> when "ME" phonebook
is chosen.
The range of available positions in a phonebook depends on the
selected phonebook.