Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1339 of 1904 2022-03-04
Not Subject to NDA
- any host name to be solved with a DNS query
<closureTy
pe>
intege
r
0
socket closure behaviour for TCP
Values:
0
:
local host closes immediately when remote host has
closed
255
:
local host closes after an escape sequence (+++)
<localPort>
intege
r
N/A
local host port to be used on UDP socket
Value:
1÷65535
:
port number
<userIpTyp
e>
intege
r
0
ip type for socket to open
Values:
0
:
no ip type chosen
1
:
IPv4
2
:
IPv6
<closure type> parameter is valid only for TCP socket type, for UDP sockets
left unused.
<local port> parameter is valid only for UDP socket type, for TCP sockets
left unused.
the resolution of the host name is done when opening the socket, therefore
if an invalid host name is given to the #SKTD command, then an error
message will be issued.
the command to be successful requests that:

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English