Telit Wireless Solutions LE910C series - Page 1729

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1729 of 1904 2022-03-04
Not Subject to NDA
GNSS receiver: validated Ephemeris and
Almanac.
Factory Reset performs the same operation as Coldstart.
<resetType> sets the kind of start when GNSS is activated through
$GPSP command.
AT$GPSR?
Read command returns the currently used reset type, in the format:
$GPSR: <resetType>
AT$GPSR=?
Test command reports the range of supported values for parameter
<resetType>.
The current setting is stored through $GPSSAV command.
Factory reset
AT$GPSR=0
OK