Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1212 of 1904 2022-03-04
Not Subject to NDA
0
:
deactivate the context
1
:
activate the context
<userId>
string
-
user identifier, used only if the context
requires it
<pwd>
string
-
password, used only if the context requires
it
Additional info:
Execution command returns a list of IP addresses for the specified
context identifiers in the format:
If IP or IPV6 PDP context:
#SGACT: <ipAddr>
For DUAL STACK IPV4V6 PDP context:
#SGACT: [<ipAddrV4>],[<ipAddrV6>]
Name
Type
Default
Description
<ipAddr>
string
-
ip address ipv4 or ipv6
<ipAddrV4>
string
-
ip address ipv4(if v4 PDP context
activated)
<ipAddrV6>
string
-
ip address ipv6(if v6 PDP context
activated)
context activation/deactivation returns ERROR if there is not any
socket associated to it (see AT#SCFG).
In LTE network, default PDP context (cid 1) is activated by
piggybacking on LTE attach procedure and maintained until
detached from NW. This command with cid 1 is just binding or
unbinding application to the default PDP context.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English